Designed for I-joists, the THAI has extra-long straps and can be field-formed to give height adjustability and top-flange hanger convenience. Positive-angle nailing helps eliminate splitting of the I-joist’s bottom flange.

• Model No. THAI2.06/22
• Description. Adjustable I-Joist Truss Hanger
• Material. 18 gauge
• Finish. Galvanized

Installation

• Factory-order the THAI-2 for hanger width needed.See table for allowable widths.
• Contact us for Configurable Options and Special orders
• Use all specified fasteners. Verify that the header can take the fasteners specified in the table.
• Web stiffeners are required for all I-joists used with these hangers.
• When a total of 20 face nails are used in THAI straps, or 30 face nails are used in THAI-2 straps, the maximum load-carrying capacity is achieved.
• Reduce load given by allowable nail shear capacity for each nail less than maximum.
• A minimum nailing configuration is shown for top nailing installations. The strap must be field-formed over the top of the header by a minimum of 2 1/2″.
• Uplift – lowest face nails must be filled to achieve uplift loads.

Note:Product dimensions may differ from picture. Please see above item description for specifications.